RECOMMENDED HOLE SIZE: 5 in. – 10 in. (127 - 254 mm)
MAXIMUM RECOMMENDED DEPTH: 2500 ft. (762 m)
DRILL PIPE DIAMETER & LENGTH: 4 in. – 4 ½ in. (102 – 114 mm) x 20 ft. (6.1m)
CAROUSEL CAPACITY: 9 pieces (180 ft.) 4 in. or 4 ½ in.
DRILL PIPE CAPACITY: 540 ft. of 4 in. or 480 ft. of 4 ½ in.
MAXIMUM RATED PULLBACK: 55,000 lbs. (24,948 kg)
MAXIMUM RATED PULLDOWN: 30,000 lbs. (13,608 kg)
HEAD TRAVEL: 28 ft. (8.5 m)
TABLE OPENING: 22 in. (559 mm)
STANDARD ROTATION & TORQUE: 0 – 106 RPM @ 85,795 lb-in. (9695 Nm)
AIR COMPRESSOR & ENGINE:
- STD: 900 CFM @ 350 PSI @ 1800 RPM (25.5 m³/min @ 24 Bar)
w/ 540 HP (403 kW) CAT C15 ACERT
- OPT: 1000 CFM @ 350 PSI @ 2100 RPM (28.3 m³/min @ 24 Bar)
w/ 540 HP (403 kW) CAT C15 ACERT
- OPT: 1070 CFM @ 375 PSI @ 1800 RPM (30.3 m³/min @ 25.8 Bar)
w/ 580 HP (433 kW) CAT C15 ACERT
- OPT: 1160 CFM @ 375 PSI @ 1800 RPM (32.6 m³/min @ 25.8 Bar)
w/ 630 HP (470 kW) CAT C18 ACERT
APPROXIMATE BARE MACHINE WEIGHT: 56,000 lbs. (25,402 kg)
Rated capacity is for 5 in. to 10 in. (127 mm to 254 mm) using down-the-hole hammer drilling. Maximum depth varies depending on hole diameter, formation, and equipment selected.
Standard mounting for the T-650-W LEGEND 6 is a heavy-duty, three axle truck with 20,000 lb. (9,072 kg) front, 46,000 lb. (20,865 kg) rear axles, and 485 HP (362 kW) diesel engine, and 10 speed transmission. Optional 23,000 lb. (10,433 kg) front axle may be required for casing hammer applications.
HOIST and PULLDOWN SYSTEM:
Standard rated hoisting capacity of 55,000 lb. (24,948 kg), 30,000 lb. (13,608 kg) pulldown. Optional extra heavy hoisting capacity of 70,000 lb. (31,751 kg) available. Maximum hoist rate of 166 fpm (51 mpm). Maximum feed rate is 75 fpm (23 mpm).REGEN increases feed rate to 122 fpm (37 mpm). Chain: Two heavy duty #160HS hoist chains and two #140HS feed chains are provided. Stroke: 28 ft. (8.5 m) for 20 ft. (6.1 m) drill pipe. 22 in. (559 mm) table opening.
0 to 106 rpm at 85,795 lbs-in (9,695 Nm) torque. (Based on 100% efficiency). Equipped with nylon guide shoes. Optional speeds and torques available.
900 CFM (25.5 m3/min) @ 350 PSI (24 Bar) with an Air Pressure Regulator is standard. Synthetic PAO, ISO 32 compressor oil is provided. Optional—1000 CFM (28.3 m3/min) @ 350 PSI (24.1 Bar) with 540 HP (403 kW) Caterpillar C15 ACERT diesel engine; 1070 CFM (30.3m3/min) @ 375 PSI (25.8 Bar) with 580 HP (433 kW) Caterpillar C15 ACERT diesel engine;1160 CFM (32.6 m3/min) @ 375 PSI (25.8 Bar) with 630 HP (470 kW) Caterpillar C18 ACERT diesel engine;
Caterpillar C15 ACERT diesel engine, rated 540 HP (403 kW) @ 1800 rpm with 175 gal. (662 L) fuel capacity.
Heavy duty structural steel mast with angular stress members an steel plated reinforcement at high stress areas, total length 34 ft. (10.4 m) for 28 ft. (8.5 m) stroke, and is raised and lowered by two 5.5 in. (140 mm) diameter hydraulic cylinders equipped with safety counterbalance valves.
The T-650-W LEGEND 6 utilizes three (3) leveling jacks with 7 in. (178 mm) jack support boots and integral safety check valves. 2 rear jacks are 5 in. (127 mm) bore x 36 in. (914 mm), single front jack is 5 in. (127 mm) bore x 48 in. (1.2 m) stroke.
DRILL PIPE HANDLING:
The T-650-W LEGEND 6 is standard equipped with a 9 pod loader for 4 in. (102 mm) or 4.5 in. (114 mm) x 20 ft. (6.1 m) pin up REICHdrill style drill pipe. Loader is equipped with hydraulic indexing and auto lock feature. A hydraulically operated holding wrench with hydraulic lift and a hydraulic breakout wrench are also provided. An 8,500 lb. (3,855 kg) hydraulic winch, with a 270° hydraulic swing and extendable jib boom is included. A wireless radio remote is provided to aid in drill pipe handling to control the functions of jib swing, retract & extend, winch up & 2 speed down, and loader index.
PIPE RACK: For carrying 18 pieces of 4 in. (102 mm) or 15 pieces of 4.5 in. (114 mm) drill pipe.
AIR FILTERS: Individual heavy duty two stage dry type filters with a pre-cleaner for engine and compressor.
NIGHT LIGHTING: Four (4) shock mounted halogen flood lights for viewing deck, mast, and drilling areas.
Mounted on the right rear side of the drill and ergonomically designed for maximum efficiency. All drilling controls and operational gauges are located in this area. An operator’s platform is also included. The T-650-W LEGEND 6 control system utilizes pressure compensated variable speed rotation and hoist/feed control valves. Direction and flow are controlled by one lever. Accessory functions are controlled via manual directional control valves with the water injection and winch controls on independent (isolated) hydraulic circuits.
-Combined Safety, Parts, and Operations Manual.
-50 hour Maintenance Kit-includes hydraulic, compressor, and case drain filters.
-Cartridge style grease gun and safety kit are also provided.
APPROXIMATE WEIGHT & DIMENSIONS:
Weight: 60,320 lbs. (27,361 kg)
Width: 8 ft. 3 in. (2.5 m)
Height (mast down): 13 ft. 6 in. (4.1 m)
Height (mast up): 40 ft. 6 in. (12.3 m)
Length (mast down):38 ft.6 in. (11.7 m)
Length (mast up): 36 ft. (11 m)
-Dual speed and torque rotary heads
-Compressor variable volume control
-Four leveling jack system
-9 gpm (34 L/min), 20 gpm (76 L/min), and 25 gpm ( 95 L/min) water injection
-Air line lubricator—8 gal. (30.3 L)
-Auxiliary blowdown controls
-Engine heater for cold weather starts
-Auxiliary fuel or water tank
-Carousel mounted stabilizer holder
-Hanger tube mounted stabilizer holder
-Additional Halogen lighting
-Engine and compressor extended warranties